ads

Wednesday, April 14, 2010

wow Crown I-Tech Amplifier

wow i just watch this video in youtube about the new Crown I-Tech Amplifier
and all i can say is that it looks like a good amp to have. So if your thinking of getting a new amp one them you should look at this amp. Watch this to video on this amp and you will say yeah this is the amp for me
like how many big amp can you drop at 2 feet and still work after or at   6.5 feet and survived it to still work wow!
Crown I-Tech Amplifier
cant wait for my boss to get new amps but i think it will be a long time before it happen  cause crown make good amp we use the Macro-Tech 2400  but there was 1 bad amp that crown made and that was the CE we had the CE4000 had one we could not get it fix at all 

this amp is Light weight due to aluminum construction, special internal construction and switching power supply.
make it ease to move for touring sound applications. it  has a Onboard DSP 24-bit, 96 kHz


Crown I-Tech Amplifier Drop-Test 2 feet  6.5 feet



Specifications
Performance
I-T8000
Input Sensitivity (volts RMS) for rated output
Adjustable in 0.1V steps from 1.4V to 7.75V
Voltage Gain for full rated power at 8 ohms
37.1 dB to 22.2 dB
37.9 dB to 23.0 dB
39.3 dB to 24.5 dB
Frequency Response (at 1 watt, 20Hz - 20 kHz)
± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power, A-weighted
> 105 dB
Total Harmonic Distortion (THD) at full rated power
< 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB
< 0.35%
Maximum Input Level
+15 dBu or +21 dBu, depending on setting of maximum input level
Latency (analog, digital inputs)
Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below.
A/D, D/A Converters
24-bit 96 kHz Cirrus Logic
Digital Input
AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
Network
Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
DSP
24-bit conversion with 32-bit, floating-point DSP processing
Attenuators
Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.
Damping Factor (8 ohms): 20 Hz to 100 Hz
> 5000
Crosstalk (below rated power, 20 Hz to 1 kHz)
> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)
> 50 dB
DC Output Offset (Shorted input)
< ± 3 mV
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load Impedance (Note: Safe with all types of loads)
Stereo
Bridge Mono
1-2-4-8-16 ohms
2-4-8 ohms
Required AC Mains
Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC.
AC Line Connector
USA, UK, European, Australia, India
Construction
All Models
Ventilation
Flow-through ventilation from front to back
Cooling
Dual-zone, microprocessor controlled, continuously variable speed fans
Dimensions
EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
Weight
Net

28 pounds (12.7 kg)

2 comments:

  1. My friend,
    I have enjoyed visiting your blog and thank you for all the music that you have shared..you are like a sunshine and for that I am giving you the Sunshine Award..do come to my blog to collect it..gratz :)

    ReplyDelete
  2. Sign in EasyHits4U to generate traffic to your website and earn money for Clik.

    Http://oblogdasnoticias.blogspot.com/

    ReplyDelete

Popular Posts of All time

My Blog List

booyaka mix's Fan Box