wow i just watch this video in youtube about the new Crown I-Tech Amplifier
and all i can say is that it looks like a good amp to have. So if your thinking of getting a new amp one them you should look at this amp. Watch this to video on this amp and you will say yeah this is the amp for me
like how many big amp can you drop at 2 feet and still work after or at 6.5 feet and survived it to still work wow!
cant wait for my boss to get new amps but i think it will be a long time before it happen cause crown make good amp we use the Macro-Tech 2400 but there was 1 bad amp that crown made and that was the CE we had the CE4000 had one we could not get it fix at all
this amp is Light weight due to aluminum construction, special internal construction and switching power supply.
make it ease to move for touring sound applications. it has a Onboard DSP 24-bit, 96 kHz
Crown I-Tech Amplifier Drop-Test 2 feet 6.5 feet
Specifications
and all i can say is that it looks like a good amp to have. So if your thinking of getting a new amp one them you should look at this amp. Watch this to video on this amp and you will say yeah this is the amp for me
like how many big amp can you drop at 2 feet and still work after or at 6.5 feet and survived it to still work wow!
 |
| Crown I-Tech Amplifier |
this amp is Light weight due to aluminum construction, special internal construction and switching power supply.
make it ease to move for touring sound applications. it has a Onboard DSP 24-bit, 96 kHz
Crown I-Tech Amplifier Drop-Test 2 feet 6.5 feet
Specifications
| Performance |
I-T8000
| ||
| Input Sensitivity (volts RMS) for rated output |
Adjustable in 0.1V steps from 1.4V to 7.75V
| ||
| Voltage Gain for full rated power at 8 ohms |
37.1 dB to 22.2 dB
|
37.9 dB to 23.0 dB
|
39.3 dB to 24.5 dB
|
| Frequency Response (at 1 watt, 20Hz - 20 kHz) |
± 0.25 dB
| ||
| Signal to Noise Ratio below rated full-bandwidth power, A-weighted |
> 105 dB
| ||
| Total Harmonic Distortion (THD) at full rated power |
< 0.35%
| ||
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB |
< 0.35%
| ||
| Maximum Input Level |
+15 dBu or +21 dBu, depending on setting of maximum input level
| ||
| Latency (analog, digital inputs) |
Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below.
| ||
| A/D, D/A Converters |
24-bit 96 kHz Cirrus Logic
| ||
| Digital Input |
AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
| ||
| Network |
Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
| ||
| DSP |
24-bit conversion with 32-bit, floating-point DSP processing
| ||
| Attenuators |
Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.
| ||
| Damping Factor (8 ohms): 20 Hz to 100 Hz |
> 5000
| ||
| Crosstalk (below rated power, 20 Hz to 1 kHz) |
> 80 dB
| ||
| Common Mode Rejection (CMR) (20 Hz to 1 kHz) |
> 50 dB
| ||
| DC Output Offset (Shorted input) |
< ± 3 mV
| ||
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
| ||
| Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono |
1-2-4-8-16 ohms
2-4-8 ohms | ||
| Required AC Mains |
Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC.
| ||
| AC Line Connector |
USA, UK, European, Australia, India
| ||
| Construction |
All Models
| ||
| Ventilation |
Flow-through ventilation from front to back
| ||
| Cooling |
Dual-zone, microprocessor controlled, continuously variable speed fans
| ||
| Dimensions |
EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
| ||
| Weight Net |
28 pounds (12.7 kg)
| ||
craze swept the world and empowered a short generation with some of the most intensely uplifting vibes with the Jungle music revolution.
)
