bitlanders

Wednesday, April 14, 2010

wow Crown I-Tech Amplifier

wow i just watch this video in youtube about the new Crown I-Tech Amplifier
and all i can say is that it looks like a good amp to have. So if your thinking of getting a new amp one them you should look at this amp. Watch this to video on this amp and you will say yeah this is the amp for me
like how many big amp can you drop at 2 feet and still work after or at   6.5 feet and survived it to still work wow!
Crown I-Tech Amplifier
cant wait for my boss to get new amps but i think it will be a long time before it happen  cause crown make good amp we use the Macro-Tech 2400  but there was 1 bad amp that crown made and that was the CE we had the CE4000 had one we could not get it fix at all 

this amp is Light weight due to aluminum construction, special internal construction and switching power supply.
make it ease to move for touring sound applications. it  has a Onboard DSP 24-bit, 96 kHz


Crown I-Tech Amplifier Drop-Test 2 feet  6.5 feet



Specifications
Performance
I-T8000
Input Sensitivity (volts RMS) for rated output
Adjustable in 0.1V steps from 1.4V to 7.75V
Voltage Gain for full rated power at 8 ohms
37.1 dB to 22.2 dB
37.9 dB to 23.0 dB
39.3 dB to 24.5 dB
Frequency Response (at 1 watt, 20Hz - 20 kHz)
± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power, A-weighted
> 105 dB
Total Harmonic Distortion (THD) at full rated power
< 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB
< 0.35%
Maximum Input Level
+15 dBu or +21 dBu, depending on setting of maximum input level
Latency (analog, digital inputs)
Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below.
A/D, D/A Converters
24-bit 96 kHz Cirrus Logic
Digital Input
AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
Network
Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
DSP
24-bit conversion with 32-bit, floating-point DSP processing
Attenuators
Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.
Damping Factor (8 ohms): 20 Hz to 100 Hz
> 5000
Crosstalk (below rated power, 20 Hz to 1 kHz)
> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)
> 50 dB
DC Output Offset (Shorted input)
< ± 3 mV
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load Impedance (Note: Safe with all types of loads)
Stereo
Bridge Mono
1-2-4-8-16 ohms
2-4-8 ohms
Required AC Mains
Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC.
AC Line Connector
USA, UK, European, Australia, India
Construction
All Models
Ventilation
Flow-through ventilation from front to back
Cooling
Dual-zone, microprocessor controlled, continuously variable speed fans
Dimensions
EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
Weight
Net

28 pounds (12.7 kg)

Friday, April 9, 2010

how to edit code for wp-content

how to edit the code wp-content to show your tag link to where you want it to go

this is the code just copy it and paste it where you want it to be but it has to have Flash Player 9 or better for it to work  WP Cumulus  was made by roytanck.com and to get this code to work i had to get a wordpress blog so that i can look at the code and make it work for blogger page and any where that you can add a HTML in it. WP Cumulus is a Plugins for wordpress  blog. So this code work because of my wordpress blog site  View mo ako Pinoy ako!!!  So pls dont edit the tag Uncategorized that links to my blog at wordpress
because the Script that Allow Access to this code is there


<h2 class="widgettitle">
Booyaka Mix</h2>
<object data="http://www.roytanck.com/wp-content/plugins/wp-cumulus/tagcloud.swf?r=244095" height="200" type="application/x-shockwave-flash" width="190"><param name="movie" value="http://vmapa.blogetery.com/wp-content/plugins/wp-cumulus/tagcloud.swf?r=8355201" />
<param name="bgcolor" value="#ffffff" />
<param name="AllowScriptAccess" value="always" />
<param name="wmode" value="transparent" />
<param name="flashvars" value="tcolor=0x333333&amp;tcolor2=0x333333&amp;hicolor=0x00FF80&amp;tspeed=100&amp;distr=true&amp;mode=both&amp;tagcloud=%3Ctags%3E%3C%2Ftags%3E&amp;categories=%09%3Ca+href%3D%22http%3A%2F%2Fvmapa.blogetery.com%2Fcategory%2Funcategorized%2F%22+title%3D%22View+all+posts+filed+under+Uncategorized%22%3EUncategorized%3C%2Fa%3E+%281%29%3Cbr+%2F%3E%0A%09%3Ca+href%3D%22http%3A%2F%2Fbooyaka.ning.com%2F%22+title%3D%22View+all+posts+filed+under+booyaka%22%3Ebooyaka%3C%2Fa%3E+%281%29%3Cbr+%2F%3E%0A%09%3Ca+href%3D%22http%3A%2F%2Fbooyakamix.blogspot.com%2F%22+title%3D%22View+all+posts+filed+under+BooyakaMix%22%3EBooyakaMix%3C%2Fa%3E+%281%29%3Cbr+%2F%3E%0A" />
</object><span style="font-size:9px;"> </span> WP-Cumulus by <a href="http://www.roytanck.com/">Roy Tanck</a> and  requires <a href="http://www.macromedia.com/go/getflashplayer">Flash Player</a> 9 or better.
<a href="http://booyakamix.blogspot.com/2010/04/how-to-edit-code-for-wp-content.html">Get your code</a>




after you paste it you should see some like what i have here



Uncategorized 
booyaka mix WP-Cumulus by Roy Tanck and requires Flash Player 9 or better.



now if you want to add your own tag to it and links. this is the code that you need to copy and edit and add to your wp-content  code where you see booyaka that is my tag just edit it with your tag and add your  url where my  url is booyakamix.blogspot.com
%09%3Ca+href%3D%22http%3A%2F%2Fbooyakamix.blogspot.com%2F%22+title%3D%22View+all+posts+filed+under+booyaka%22%3Ebooyaka%3C%2Fa%3E+%281%29%3Cbr+%2F%3E%0A

after you have edit your line of  code just add it after the %3E%0Aadd code here " />
and if you want to know more on it just go to roytanck.com

Tuesday, April 6, 2010

WP Cumulus for blogger yeah that work

Apple




wow i just love this thing man how Roy Tanck,made this. when i saw this at
Sergey  NewsKS blog and Boja Linuxer Blo..
i wanted to know how they did it. 
And then i right click on the widget i saw Roy Tanck name and it took me to his  word press blog  and there i find out that this WP-Cumulus is only for word press blogger that made me sad cuz i cant have it on my blog but did not lost hope cuz google is my friend eheheh! so i hit google wp-cumulus blogger Search there it is a big list of site that say they got it to work

WP-Cumulus for Blogger = Blogumus! 

This one i click and it took me back to Roy Tanck word press blog man that suck!! 

But here he say that I would not have thought it to be possible, but Amanda has succeeded in porting WP-Cumulus to Blogger. She’s written a short tutorial on how to set it up, which is surprisingly easy to do. I haven’t used Blogger since 2003, and wouldn’t have known where to start. So thanks Amanda!

so i hit Amanda blog to see if i can get hand on WP-Cumulus for my blog

but the code that amanda has  just fu*%up my amazon widget 

and it did not  work.  Yeah that just  suck big time but  i is not sad cuz i got this cool new Flickr Widget! 

By Roy Tanck the man that did the WP-Cumulus and his photo widget is cool  as you can see here

Roy Tanck's Flickr Widget requires Flash Player 9 or better.

Get this widget at roytanck.com

but how to get this WP Cumulus to work for as blogger pls Roy Tanck make one for blogger
but from what i can see of his code if you know someone with a word press blog and the
plugin wp cumulus they can make you one and just give you the code to use on your blog as you can see
i have added booyaka mix and dj booyaka in there if you look at it and by the way if you click on it it will take you to Roy Tanck blog

So did i get it to work for a blogger?? yeah i did get it to work you can get the Code here 
and how to edit code for WP Cumulus content

Popular Posts

coinurl

Google+ Followers

My Blog List

HCB